Robotics Showcase recap header photo
Quebec CityOctober 29, 2026

Event Recap

Inside Québec’s Robotics Showcase: 119 Engineers, Researchers, and Builders Explore AI at the Physical Edge

On October 29, 2026, 119 builders, researchers, and technology leaders gathered in Québec to explore the convergence of artificial intelligence and robotics. From open-source prosthetics to underwater dive companions, six presentations detailed how software models interact with physical hardware in real-world environments. The evening offered a direct, technical look into how local teams are solving complex engineering bottlenecks across industrial welding, mining equipment, water treatment, and humanoid locomotion.

Streamlining Small-Batch Robotic Welding with 3D Vision

Christian Lelièvre presented a 3D vision system for Fanuc cobots designed to make short-run assembly welding fast and cost-effective without custom mounting fixtures.

Christian Lelièvre introduced Soudage robotisé avec cobot et vision 3D, detailing how a 3D camera mounted on a Fanuc CRX25 collaborative robot accelerates setup times for short production runs. By bypassing fixed mounting fixtures and static positioning, the integration aims to make small-batch assembly welding profitable and fast to program. The presentation outlined the practical steps required to train technicians and connect vision software to cobot hardware without custom tooling overhead.

Soudage robotisé avec cobot et vision 3D

Christian Lelièvre focuses on integrating 3D camera systems with collaborative robots to simplify programming for small-batch industrial welding.

Controlling Industrial Mine Crushers with an Xbox Controller & Modbus

Hedi Braham introduced ATI-LAB for ModelEAU, an AI assistant for water treatment lab docs, alongside a system controlling heavy mine crushers via Xbox controller and Modbus TCP.

Hedi Braham presented ATI-LAB, an AI assistant developed for ModelEAU at Université Laval that centralizes technical documentation across automated water treatment pilot plants. The presentation highlighted how mine operators can control industrial rock crushers using a standard Xbox controller routed through a Raspberry Pi over Modbus TCP. By mapping HMI popups to PLC tags and collecting operator footage, ModelEAU is building datasets to train future AI models on optimal crushing movements.

ModelEAU

Hedi Braham is an AI researcher developing ATI-LAB for Université Laval's ModelEAU laboratory to query automated SCADA and PLC documentation.

Scaling Physical AI Hardware and Software Orchestration with Robotiq

Louis-Alexis Allen Demers detailed Robotiq's hardware approach to physical AI data capture and software automation with their IQ workcell platform.

Louis-Alexis Allen Demers walked through how Robotiq tackles the gap between robust physical hardware and artificial intelligence models. Drawing on data from over 23,000 grippers deployed globally, the presentation detailed the engineering challenges of capturing force, perception, and touch in unpredictable industrial settings. Demers also introduced their IQ software platform, demonstrating how automated trajectory simulation and workcell modeling replace manual engineering bottlenecks in palletizing.

Robotiq

Louis-Alexis Allen Demers represents Robotiq, an industrial robotics firm deploying thousands of grippers globally to advance physical AI and cell automation.

Low-Cost Open-Source Myoelectric Prosthetic Hands

Sidi Yaya Konaté showcased a low-cost, open-source 3D-printed myoelectric prosthetic hand controlled via EMG sensors, computer vision, and Bluetooth.

Sidi Yaya Konaté presented Main prothétique myoélectrique imprimée en 3D, an open-source prosthetic hand built using 3D-printed plastic, an Arduino Uno, and inexpensive micro-servos. Designed to cost roughly $30 to $40 for the frame, the device reads muscle contractions via EMG sensors, computer vision, or Bluetooth commands. Two young volunteers joined Konaté on stage to demonstrate remote gesture control, executing peace signs and object grasps live in front of the crowd.

Main prothétique myoélectrique imprimée en 3D

Sidi Yaya Konaté is an open-source hardware designer building accessible, affordable prosthetic solutions using microcontrollers and 3D printing.

Training Poppy the Humanoid Robot to Walk using MuJoCo and Reinforcement Learning

Ekissi Yohann showcased Poppy, a 3D-printed humanoid robot trained to walk using MuJoCo CPU simulations and reinforcement learning.

Ekissi Yohann from the Université Laval AI club presented Poppy humanoid, an open-source 3D-printed 25-motor robot learning to walk strictly through trial-and-error reinforcement learning. Using CPU-based MuJoCo simulations, the team compressed 28 hours of physical walking practice into three hours of virtual training, teaching the model to maintain balance and cover 6.6 meters in ten seconds. The audience watched simulation playback showing the robot's awkward but functional gait, alongside a look at early iterations where the robot attempted to march sideways.

Poppy humanoid

Ekissi Yohann leads robotics experiments within the Université Laval AI Club, deploying reinforcement learning onto open-source humanoid hardware.

Robotic Companions for Scuba Divers: AI-Driven Underwater Communication and Safety

Claire Dune presented research on AI-driven underwater drones that learn diver gesture language to assist navigation and monitor safety underwater.

Claire Dune detailed Quand les robots apprennent à comprendre les plongeurs, examining how autonomous underwater drones can interpret diver sign language and monitor for signs of distress. Because water pressure, equipment, and shifting light alter human gestures significantly compared to dry land, vision algorithms must be trained on underwater-specific biomechanics. The research demonstrates how visual perception and acoustics allow robotic companions to guide navigation and assist during underwater emergencies.

Quand les robots apprennent à comprendre les plongeurs

Claire Dune is a robotics researcher and dive instructor exploring human-robot underwater interaction through computer vision and acoustic sensing.

Conversations and Code Swaps Across the Québec Robotics Community

Once the final pitch wrapped, the room remained full as attendees gathered around the stage and hardware displays to inspect components up close. Engineers, students, and founders swapped contacts, debated control protocols, and discussed potential technical collaborations late into the evening. The steady chatter across the venue highlighted a growing, tightly connected ecosystem dedicated to solving physical AI challenges right here in Québec.
Robotics Showcase networking after the presentations

Want to be at the next one?

See upcoming events